January 18, 2010, 9:23 am
It is no surprise that Gentoo Prefix works fine on arm-linux given the great work being done in Gentoo Linux by the ARM team (armin76, maekke, et al).
For the Genesi Efika MX (unboxing), I now have a binpkg repo setup (for Gentoo Prefix only). This was mainly a fun proof-of-concept that I did. I went from installing 70 packages in about 18 hours, to about 30 minutes using binpkgs.
What does this mean:
Given the relatively small set of arm users and the highly specific use cases for arm hardware, well, there isn’t a very big percentage of users that will keep Ubuntu on their Efika MX when they get it. But, if they do, that means that they can get a complete toolchain and Gentoo Linux userland (including portage package manager) on the host in less than an hour. Of course, they could also get the same packages from the Ubuntu package manager but that isn’t as cool 
How to install/get working:
Follow this easy guide that I wrote, here. All 70 packages will occupy about 580MB of space. Then you will have the toolchain and portage (emerge) at your disposal to use on your Ubuntu ARM (cortex-a8, armv7) system.
Have fun.
January 12, 2010, 10:32 am
My linode is now my personal DNS resolver. I have officially ditched the ISP nameservers from this point forward now that I found unbound. Unbound is a lightweight, recursive resolver that is perfect for your LAN, co-located host, or even a single host.
For your single host, emerge unbound, start the service, add 127.0.0.1 to the first nameserver in /etc/resolv.conf. Unbound is setup (by default) to accept connections from localhost and refuse anything else. If you are using dhcp at home (likely) then also emerge openresolv and uncomment name_servers=127.0.0.1 in /etc/resolvconf.conf, openresolv then “intercepts” dhcpcd when it tries to write to /etc/resolv.conf and adds 127.0.0.1 as your first nameserver For your LAN, just configure your router to look to the host that you setup unbound on, with additional configuration.
Finally, you can also have unbound run on your co-located host. Just edit /etc/unbound/unbound.conf to a) listen on an outside interface and b) allow your other host to query it. This will be left as an exercise for the reader, it is easy to figure out.
Lastly, a shout-out to Linux Gazette for an excellent write-up on GoogleDNS (and why you should use something like unbound) and DNS/LAN metaphors. Suggested reading if you feel out of your league with DNS internals, like me.
A quote from the above linked article: “Why outsource to anyone, when you can do a better job locally, at basically no cost in effort?“ and really, that is the truth. Have fun.
January 8, 2010, 9:42 pm
In June 2009, I started tracking my gasoline usage in my car via fuelly.com. There is no specific reason that I started doing this, just for fun I guess. I kind of like tracking how much I spend on such things in a neat graphical format. So, 2009 stats (since June): 26 fuel-ups, 8,130 miles, $631.50. You can find my current stats here by clicking on the image below.
